4.9/5 from 25,000+ Homeowners

Toilet Installation & Replacement in Birmingham, AL

Professional toilet installation, replacement, and repair for Birmingham homes

Providing Expert Service Since 2007

Is Your Toilet Showing These Signs It's Time for a Replacement?

Constant Running or Phantom Flushing

A toilet that runs continuously or flushes on its own is wasting hundreds of gallons of water per month. When internal repairs no longer hold, replacement is the cost-effective solution.

Frequent Clogs and Weak Flushes

A toilet that clogs regularly or requires multiple flushes to clear the bowl signals an aging trapway, mineral buildup, or an outdated low-flow design that modern toilets have long since solved.

Cracks in the Tank or Bowl

Any visible crack in the porcelain, even a hairline crack, can worsen without warning, causing a sudden leak that dumps gallons of water onto your bathroom floor and into the subfloor below.

Wobbling, Leaking at the Base, or Persistent Odor

A toilet that rocks, leaks water at the base, or emits sewer odors indicates a failed wax ring, a corroded flange, or subfloor damage that should be addressed during replacement.

Complete Toilet Installation & Replacement Services in Birmingham, AL

From the older homes in neighborhoods like Homewood, Vestavia Hills, and Mountain Brook to newer properties throughout the Birmingham area, the needs for toilet installation and replacement vary widely among local households. Many of Birmingham’s aging homes still have outdated high-gallon toilets that increase water bills and run far less efficiently than modern fixtures, and decades-old units paired with worn supply lines are common in the area’s established housing stock. Birmingham’s mineral-rich hard water can also wear down internal toilet components more quickly, leading to leaks, poor flushing, and premature failures. Our certified plumbers handle selection guidance, removal, installation, and disposal of the old unit so the job is done right the first time.

Standard Toilet Installation & Replacement

Standard toilet replacement in Birmingham begins with shutting off your home’s water supply, disconnecting and removing the old toilet, and inspecting the flange and surrounding subfloor for hidden damage.

A total replacement generally includes:

If water damage from a previous leak has affected your subfloor, repairs should be completed before the new toilet is installed to ensure long-term stability. Then, we can replace the wax ring or install a modern wax-free seal, properly set and level the new toilet, reconnect the supply line, and thoroughly test flush performance and leak protection.

High-Efficiency & Water-Saving Toilets

Federal standards currently require toilets to use no more than 1.6 gallons per flush, while WaterSense-certified models use 1.28 gallons or less and can save approximately 13,000 gallons of water annually for a family of four compared to older 3.5 to 7 GPF toilets.

We can help with:

Modern options include single-flush 1.28 GPF models, dual-flush systems with 0.8/1.28 GPF settings, and pressure-assisted toilets that provide powerful flushing with minimal water usage. Today’s WaterSense toilets must pass strict performance testing standards, and trusted brands such as Kohler, TOTO, American Standard, and Delta offer highly efficient models.

Specialty & Upgraded Toilet Installation

If you’re a homeowner looking for greater comfort, accessibility, or modern bathroom upgrades, you may want a specialty toilet installation. Comfort-height ADA-compliant toilets sit approximately 17 to 19 inches high instead of the traditional 15 inches, making them easier for seniors, taller adults, and individuals with mobility concerns.

Our plumbing professionals can offer you:

Bidet toilets and bidet seat installations continue to grow in popularity and may require nearby electrical outlets, GFCI protection, and upgraded water supply connections. Wall-hung toilets provide a sleek, modern appearance with easier floor cleaning, though they require concealed in-wall carrier systems and more extensive rough-in work.

Toilet Repair & Component Replacement

Not every toilet problem requires complete replacement, and many common issues can be repaired cost-effectively. Running toilets, weak flushing, phantom flushing, loose or rocking bases, leaking seals, slow tank fills, and broken handles are often caused by worn internal components.

Our professional plumbers can address:

Toilets leaking at the base or producing sewer odors often require a wax ring replacement, which involves properly removing and resetting the toilet. If flange corrosion or structural damage prevents a secure seal, flange repair or replacement may also be necessary.

100% Satisfaction Guarantee

If you’re not completely satisfied with our work, we’ll make it right or refund your money.

Toilet Installation & Replacement FAQs

How much does toilet installation or replacement cost?

Toilet installation and replacement cost depends on the type of toilet and the complexity of the job. A standard replacement is the most affordable, while high-efficiency upgrades, comfort-height models, bidet toilets, and wall-hung systems cost more because of the additional materials and labor involved. Any flange repair or subfloor work also affects the total. We provide upfront pricing before any work begins, so there are no surprises.

How long does toilet installation take?

Most standard toilet replacements, without complications, can be completed in 1 to 2 hours during a single visit. Installations involving flange repair may take 2 to 3 hours, while subfloor repairs can extend the project to 3 to 5 hours. Wall-hung toilet installations and major bathroom modifications may require 1 to 2 days, depending on the scope of work.

How do I know if I should repair or replace my toilet?

If the toilet is under 10 to 15 years old and the issue involves a single replaceable component, repairs are often worthwhile. Toilets over 15 to 20 years old that require repeated repairs or use 3.5+ gallons per flush are usually better candidates for replacement.

Will a new toilet fit in the same spot as my old one?

Most toilets are designed for a standard 12-inch rough-in, which is the distance from the wall to the center of the drain flange. However, 10-inch and 14-inch rough-in models are also available for non-standard bathrooms.

Can you install a toilet I already purchased?

Yes, licensed plumbers can install customer-supplied toilets as long as the fixture is compatible with the existing plumbing setup and arrives undamaged. Our plumber will confirm the correct rough-in measurement and inspect the unit before installation begins.

Do you offer warranties and 24/7 service on toilet installations?

Most professional toilet installation services include labor warranties ranging from 1 to 2 years, covering workmanship, seals, supply-line connections, and leak protection. Manufacturer warranties on the toilet itself vary by brand and model, typically ranging from 1 to 10 years.

Schedule Professional Toilet Installation in Birmingham

Whether you need a simple toilet replacement, a high-efficiency upgrade, emergency repair service, or a luxury smart toilet installation, our experienced plumbers in Birmingham provide reliable solutions tailored to your home and budget. Schedule an estimate today to get expert guidance, upfront pricing, and dependable toilet installation or replacement service backed by professional workmanship warranties!

Benjamin Franklin Plumbing tech arrived for Toilet Installation Birmingham

Sitting Pretty with a Toilet Upgrade

As the king or queen of your castle, isn’t it about time to consider treating yourself to a new throne?

Benjamin Franklin Plumbing of Birmingham knows that a new commode may not be the most glamorous home improvement project; it is one of the most essential. Here’s how our professional toilet installation can put you in the driver’s seat:

Superior Water Efficiency: Old toilets are notorious for wasting water. Some models use up to seven gallons per flush – talk about unnecessarily high water bills! Newer toilets are designed to be much more water-efficient, using less than 1.5 gallons per flush. By choosing a water-efficient model, you can conserve a precious resource and save money simultaneously.
Flushing Force: Modern engineering gives today’s toilets maximum flushing power despite using far less water. High-efficiency mechanisms ensure waste goes down the tube the first time, and features like pressure-assisted flushing can manage any job with fewer flushes, reducing the likelihood of clogs.
Easier Cleaning: One of the perks of upgrading to a new toilet is that they are easier to sanitize. Many modern models come with fully glazed trapways and designs that minimize crevices where dirt and bacteria can accumulate. Features like self-cleaning bowls and antimicrobial surfaces further enhance hygiene.
Better Comfort and Safety: Today’s toilets offer a variety of features designed to increase convenience and accessibility. From heated seats and adjustable heights to hands-free flushing and advanced bidet cleaning, there are countless ways to customize your toilet to meet your needs. If you have mobility issues, consider a comfort-height toilet or an ADA-compliant model for easier sitting and standing.
Curb Appeal: Bathroom design is one of the first things homebuyers look at. Whether a standalone improvement or part of a larger bathroom remodeling project, adding a stylish new toilet can instantly boost your home’s aesthetic appeal, functionality, and resale value.

Our Mind’s in the Toilet

When it comes to toilet installation, you want to ensure the job is done right. Here’s what sets Benjamin Franklin Plumbing apart:

Comprehensive Service: Toilet installation is not a set-it-and-forget-it project. It requires exact placement, proper alignment, secure attachments, and thorough testing. Our professional plumbers have the expertise to oversee every aspect of the installation process:
- Precise measuring your existing plumbing lines.
- Leveling and properly securing so the toilet won’t rock.
- Secure tank-to-bowl and bowl-to-flange attachment to prevent leaks.
- Exhaustive flushing system and tank refill tests.
Extensive Product Guidance: With so many toilet brands, models, styles, and configurations available, choosing the right one can be overwhelming. Our team has extensive product knowledge and can recommend the best options based on your bathroom layout, design preferences, accessibility needs, household usage, water efficiency goals, and budget requirements. Whether you’re looking for a traditional two-piece design, a sleek wall-hung model, or a high-tech smart toilet, we’ll help you find the perfect fit.
No-Hassle Experience: Any plumbing project can disrupt your routine. That’s why Benjamin Franklin strives to make the installation process as smooth and pressure-free as possible. Our goal is to minimize any inconvenience and leave our work area as clean as when we arrived.

Is Your Toilet Not Worth Squat?

Sometimes your toilet leaves you no choice. Its subpar performance, water waste, or chronic need for repair make it clear it’s time to spring for a new best seat in the house:

Frequent Clogs: If you’re constantly reaching for the plunger, your toilet may have an underlying issue that requires replacement.
Cracks and Leaks: Even small fissures in the toilet tank or bowl can allow massive amounts of water to escape and cause major damage to floors and walls.
Constant Filling: A toilet that constantly runs or randomly flushes wastes water and costs you money.
Old Age: Like you, a toilet can only take so much of your family’s…stuff. If your toilet is approaching its teen years, it may be more cost-effective to replace it rather than continually repair it.

Benjamin Franklin Plumbing stands behind our work with a comprehensive parts and labor guarantee. Your satisfaction is our priority, and we strive to exceed your expectations with every job. Our licensed plumbers are skilled, courteous, and dedicated to providing excellent service. Plus, with our Punctual Plumber promise, we guarantee on-time service for all scheduled appointments. If there’s any delay, it’s you we pay. We’ll put $5 in your hand for every minute we arrive past your service time, up to $300.